RSS Feed
 |
No items matching your keywords were found.
Biometric Wall Vault
|
No items matching your keywords were found.
|
No items matching your keywords were found.
| | SECURE LOGIC 20700 Steel Biometric Wall Vault Gun Safe $254.99 Drop Down Door: Allows you to install in compressed spaces Immediate Access When You Need It: Door Can be Opened In Less Than 2 seconds Protects All Your Valuables: Jewlrey, Guns, Cash, Small Electronics Versatile Storage Space:Additional Hidden Storage Underneath the Main Fabric-Lined Dompartment Easy Operation: Programs in Minutes (DIY) Do It Yourself Installation: 20-30 Minutes, See Videos Below Built to Withstand Forced Entry: Pry-Bar Safe, 12 & 14 Gauge Steel Battery Operated: Long Lasting 12 Volt Rechargeable Battery w/ Charger Hidden Back-Up Lock: Comes with Key for Immediate Back-Up Access Biometric Entry System: Can Store up to 6 Unique fingerprints & 2 PIN Codes Fingerprint must line up identically as to when the fingerprint was originally programmed Exterior Dimensions When Closed: 15.5" x 4.5" x 16.25 Exterior Dimensions When Open: 23" x 4.5" x 16.25 Weight: 25lbs - 11.34kgs Included In Box: Wall Vault (2) Back Up Keys Battery & Char Color: As Shown |
| | GunVault GVB1000 Mini Vault Biometric Gun Safe $367.71 The GunVault Bio utilizes programmable biometric scanner technology to make accessing firearms and valuables faster and more secure than ever before. A highperformance algorithm is used to achieve quick identification of enrolled fingerprints while maintaining a very low False Reject Rate (FRR). The selflearning algorithm of the GunVault Bio adds new minutiae to the fingerprint templates each time a user touches the sensor. The system can handle up to thirty fingerprint templates. GunVault Bio is constructed of tamperproof heavygauge steel and features a soft foam interior to protect its contents. The unique biometric keypad triggers an omnidirectional springloaded door that not only has a highstrength lock mechanism but also performs reliably time after time. The GunVault Bio 1000 features: Heavygauge steel housing Foam lining inside Tamperproof springloaded door Powered by a 9V battery lasts one year under normal conditions Power connection jack for external AC or DC power supply (adapter included) Blinking lowbattery light Audio and LED low battery warning Backup key for emergency access Interior courtesy light Mounting gear included Measures 8.1W x 4.9H x 12D Weighs just 9 pounds |
| | Cross Vault Arches $59.99 Cross Vault Arches - Wall Decal |
| | Vault $9.49 Vault |
| | Bulldog Biometric Fingerprint Pistol Vault, 14.5"x16.5"x8", Black $311.99 Bulldog biometric fingerprint pistol vault 14.5"x16.5"x8" (exterior dimensions) Over 25 user fingerprints can be registered/given access LED display indicates if fingerprint has been accepted Hidden cylinder key override Deluxe foam interior with egg-crate bottom pad protects your gun's finish Steel construction 2.75" motorized steel locking bolts on door Low-voltage alarm External backup battery box for emergency use Durable powder coated black matte finish The ultimate in protection of your valuables. Store guns, bonds, cash, jewelry, important papers and more in the Bulldog biometric fingerprint pistol vault. Protect your investment! |
| | Acroprint Time Q-Plus Biometric Attendance System $416.99 0% 01-0250-000 1 Each 125 125 Employee - Upgradable to 250 Time Q-Plus Biometric Attendance System Software Media Power supply 5 ft Ethernet cable 5 ft USB cable 5 ft RS232 cable Mounting plate User guide Time Q-Plus Biometric Time and Attendance System eliminates buddy punching and replacement badges. Tracks department transfers and employee hours worked in different departments. Includes benefit hours tracking, showing benefit balance. Ideal for small businesses with up to 125 employees. Can upgrade to 250 employees. Easy to clock in using fingerprint or keypad entry. Easy to set up PC software, uses flexible communications, including Ethernet. Acroprint Acroprint Time Recorder Company Automatic System Biometric Black Network No Payroll Export RS-232 Serial Silver Time Q-Plus Biometric Attendance System USB Wall-mountable Yes timeQplus www.acroprint.com |
| | GunVault MVB500 Microvault Biometric Pistol Gun Safe $280.68 Microvault Biometric. Manufacture ID: MVB500. The unique notebookstyle design allows you to take your handgun or vaulables with you. Incredibly compact and lightweight this safe will fit nside a briefcase or daypack and can be quickly accessed with GunVaultamp;rsquo;s Biometric technology (Uses fingerprint recognition to access safe contents). Specifications:. Weight: 5 lbs. External Dimensions (W x H x D): 11 x 8 1/2 x 2 1/4 . Internald Dimesions (Wx H x D): 10 3/4 x 6 1/2 x 2 . Features:. Outside is constructed of heavygauge steel. Soft foam on the inside to protect the pistol. Highstrength lock mechanism performs reliably time after time. Precise fittings are virtually impossible to pry open with hand tools. Builtin computer blocks access after repeated invalid keypad entries. Conveniently located keypad is easy to use. Unique NoEyes Keypad allows for quick access. Compatible with the Security Cable (Includes 4 ft. cable). Mounts almost anywhere. Four predrilled holes on bottom of vault |
| | Welded Aluminum Vault Box $348.95 Thick wall 5052 aluminum welded construction ensures this vault box will last the lifetime of your track. The ⅛ walls and 1/4" bottom and backstop make this the strongest vault box in the industry. Meets all NFHS, NCAA & IAAF Specifications. For the Vault Box Click Here. |
| | Gamma Plastics Vittles Vault Wall-Tainer Pet Food Storage Container $47.37 Gamma Plastics Vittles Vault Wall-Tainer Pet Food Storage Container |
| | Wolfgangs Vault $93.99 High Quality Content by WIKIPEDIA articles Wolfgangs Vault is a private musicfocused company established in 2002 dedicated to the restoration and archiving of live concert recordings and the sale of music memorabilia. It began with the collection of the late promoter Bill Graham, and added eleven other music and memorabilia archives. It was called the most important collection of rock memorabilia and recordings ever assembled in one business, by The Wall Street Journal, Dec 13, 2005. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 128 Publication Date: 2010/08/08 Language: English Dimensions: 6.00 x 9.02 x 0.30 inches |
| | Vault in St Nicholas' Church (Sint-Niklaaskerk) $124.99 Krzysztof Dydynski Vault in St Nicholas' Church (Sint-Niklaaskerk) - Wall Mural |
| | VLine 51653CSGC Gun Caddy for Closet Vault $54.08 Mounts to either inner side wall of Closet Vault. Includes Pistol Rack PRCV. |
| | David Link Biometric Time & Attendance System with Backup Battery and Software $755.28 This David-Link Biometric Time & Attendance System features advanced technology in the time and attendance field. This wall mounted system includes software and back-up battery, use for up to 300 employees and five proximity badges.Includes: Software, back-up battery, five (5) proximity badges and life time supportGood for up to 300 employeesDownload employee records with a USB flash memory device, Ethernet (TCP/IP)Port forward optionsWall mounted time clockCan use fingerprint, pin number proximity badgeModel: W-1288PB |
| | GunVault GVB2000 10 x 8 x 14 Biometric Multi Vault Safe Black $411.21 Gun safes are truly premium products that set the standard for the rest of the industry. The patented noeyes keypad provides lightning quick access even in the dark. Choose the mini when you need quick access storage for your handgun or the multi when you want space for additional valuables. Additional features include tamper indicator that notes invalid entry attempts audio disable feature that allows stealth mode operation and a built in computer that blocks access after repeated invalid keypad entries. Type: Gun Safe. Color: Black. Dimensions: 10.1 W x 7.9 H x 14 D. Entry: Fingerprint ID. Lock Type: KeyLock. |
| | Barska Optics AX11620 MINI SIZE BIOMETRIC SAFE $238.28 No combinations to remember or carry a key because your fingerprint is the key that opens the safe door Up to 30 users Store anything you want to keep hidden Predrilled holes allow the safe to be mounted into a wall onto a shelf or counter top Operates on 4 AA batteries Emergency backup keys included Dimensions: 12 x 8 x 7.75 Inner Dimensions: 11.5 x 7.5 x 5.75 OneYear Limited Warranty. |
| | G83-14501 Biometric Keyboard - keyboard $196.99 Cherry G83-14501 Biometric Keyboard - Keyboard - USB - English - US - black |
| Account limit of 2098 requests per hour exceeded. |
Locksmith Glossary
Glossary
Locksmith local have put together a glossary of locksmith terms that may be of help......
A
Access control- any barrier or device, either natural or man made, that limits or prohibits, free or unlimited access.
Alarm system- a system of electrical and/or electronic components which detect and report dangers, such as fire or intrusion.
Architectural hardware- fittings applied to protect a surface of, or to facilitate use of movable members in a building such as doors, windows, or cabinets.
B
Barrel bolt- a surface mounted slide bolt which has a cylindrical shape.
Biometric- of or pertaining to a lock with a hybrid mechanism, part of the mechanism identifies a physical attribute such as finger print, voice print, etc. while another part is a mechanical mechanism.
Bit- the part of the key which serves as the blade, usually for use in a warded or lever tumbler lock.
Bitting- the number(s) which represent(s) the dimensions of the key. The actual cut(s) or combination of a key.
Blade- the portion of a key which may contain the cuts and/or millings.
Blank- uncut, see also "key blank".
Bolt- any movable projection which blocks the movement of one object relative to another.
Bump key- a lock picking key with uniform steeples between cuts that is forced further into the lock via impact.
Burglar alarm- a system designed to detect and report conditions, which may indicate intrusion or attempted intrusion.
Bypass Key- the key which operates a key override cylinder.
C
Cam- a lock or cylinder component which transfers the rotational motion of a key or cylinder plug to the bolt works of a lock. The bolt of a cam lock.
Cam Lock- a complete locking assembly in the form of a cylinder whose cam is the actual locking bolt.
Catch- any device that holds a door closed and may be released by simply pushing or pulling on the door.
Change key- a key which operates only one cylinder or one group of keyed alike cylinders in a keying system. Any device that is used to mechanically or electronically allow resetting of certain key or combination locks, see also "reset key".
Claw bolt- a bolt with one or more fingers, which extend out of the bolt and lock behind the strike as the bolt reaches the locked position.
Clutch- the part of a profile cylinder which transfers rotational motion from the inside or outside element to a common cam or actuator. The feature of a lever handle lockset which allows free movement of the lever when locked. The feature of a cylinder which allows turning the plug without operation of the lock when a certain pressure is applied without the correct key.
Code- a designation assigned to a particular key combination for reference when additional keys or cylinders may be needed. See also, "blind code", "direct code", and "key symbol". A standard for Life Safety, structural integrity, fire safety, etc., either incorporated into the statutes of a given jurisdiction, or a model standard.
Code key- a key cut to a specific code rather than duplicated from a pattern key. it may or may not conform to the lock manufacturer's specifications.
Combination- the group of numbers which represent the bitting of a key and/or the tumblers of a lock or cylinder.
Control Key- a key whose only purpose is to remove and/or install an interchangeable or removable core. A bypass key used to operate and/or reset some combination type locks. A key which allows disassembly of some removable cylinder locks.
Cross keying- the deliberate process of combinating a cylinder (usually in a master key system) to two or more different keys which would not normally be expected to operate it together. See also "controlled cross keying" and "uncontrolled cross keying."
Curtain- in a lever tumbler lock, a device that blocks access to the keyhole when the key is turned.
Cut key- a key which has been bitted or combinated.
Cylinder- a complete operating unit which usually consists of the plug shell, tumblers, springs, plug retainer, a cam/tailpiece or other actuating device, and all other necessary operating parts.
Cylinder key- a broad generic term including virtually all keys for pin and disc tumbler locks.
Cylinder lock- any lock that is operated by a cylinder key.
D
Deadbolt- a bolt, which requires a deliberate action to extend, and which resists end pressure in the unlocking direction when fully extended.
Deadlock- a lock which incorporates a deadbolt.
Deadlocking- pertaining to any feature which, when fully engaged, resists attempts to move the latch or bolt in the unlocking direction through direct pressure.
Deadlocking latch- a latchbolt with a deadlocking mechanism.
Dimple key- a key whose cuts are drilled or milled into its blade surfaces. The cuts normally do not change the blade silhouette.
Door closer- a device designed to regulate the closing of a door automatically by various means.
Door viewer- a device with one or more lenses, mounted in a door at eye level, which allows a limited view through a door.
Double bitted key- a key typically bitted on two opposite surfaces.
Double cylinder- pertaining to a lock with two keyed cylinders.
Double locking- of or pertaining to a lock with one or more bolts with different functions, typically a latch and a deadbolt.
E
Electric strike- an electro-mechanical strike, which secures or releases the latch via applied current.
Escutcheon- a surface mounted trim which enhances the appearance and/or security of a lock installation.
F
Face plate- the finished, removable plate which covers the front of some locks.
Floor safe- a security container designed for mounting below floor level with the top surface flush with the finished floor.
Flush bolt- a non-keyed deadbolt, with a one piece escutcheon/faceplate, typically mounted flush to door surfaces.
Forced entry- entry or bypass techniques which leave obvious damage to the lock or enclosure.
G
Garage door lock- a rim lock mechanism designed for use on an overhead door, which mechanism has a spring loaded bolt which automatically locks the door's bolt mechanism.
Grand master key- the key which operates two or more separate groups of locks, which are each operated by a different master key.
Guest Key- a key in a hotel master key system which is normally used to unlock only the one guest room for which it was intended, but will not operate the lock in the shut out mode.
H
Handed- pertaining to hardware which is manufactured only for application on doors with a specific orientation.
High security cylinder- a cylinder which offers a greater degree of resistance to any two or more of the following: picking, impressioning, key duplication, drilling or other forms of forcible entry.
High security key- a key for a high security cylinder.
Hold back- a function of some self latching locks which allows selective retention of the bolt to prevent latching when the door is closed.
Hook bolt- a lock bolt shaped in the general outline of a hook. Normally used on sliding doors or where spreading of the frame and door is a possible attack.
I
Impression- the mark made by a tumbler on its key cut 2. v. to fit a key by the impression technique.
K
Key- a properly combinated device which is, or most closely resembles, the device specifically intended by the lock manufacturer to operate the corresponding lock.
Key blank- any material manufactured to the proper size and configuration which allows its entry into the keyway of a specific locking device. A key blank has not yet been combinated or cut.
Key change- referring to a lock in which the combination can be changed through the use of a special key or tool without disassembling the lock.
Key cut(s)- the portion of the key blade which remains after being cut and which aligns the tumbler(s).
Key extractor- a tool designed for use to remove a broken or stuck key from a lock.
Key gauge- a usually flat device with a cutaway portion indexed with a given set of depth or spacing specifications. It is used to help determine the combination of a key.
Key holder- a person to whom a key has been issued.
Key machine- any machine designed to cut keys, See also "key coding machine" and "key duplicating machine."
Keyed alike- of or pertaining to two or more looks or cylinders which have or are to have the same combination. They may or may not be part of a keying system.
Key hole- the opening through which a non-cylinder key must pass to enter a lock.
Keying- any specification for how a cylinder or group of cylinders are or are to be combinated in order to control access.
Keyway- the opening in a lock or cylinder which is shaped to accept key bit or blade of a proper configuration. The exact cross sectional configuration of a keyway as viewed from the front. It is not necessarily the same as the key section.
L
Latch- a mechanical or magnetic door fastener which can automatically keep a door, gate, etc., closed. Engagement of a latch when a door, gate, etc. is pushed or pulled closed.
Latch bolt- a spring actuated bolt, normally with one or more beveled surfaces, which, when aligned with the strike, engages it automatically.
Lever handle- a turn device in the general shape of an "L" used on certain locks and latches, as an alternate to a knob for ease of use.
Lever pack- a set of lever tumblers.
Lock- any device which prevents access or use by requiring special knowledge or equipment.
Lock Bumping- a picking technique that utilizes a configured key forcefully impacted into the keyway.
Lockout- any situation in which the normal operation of a lock or cylinder is prevented.
Lockset- a locking device, complete with trim, mounting hardware and strike.
Locksmith- a person with the knowledge and ability to select, install, service and bypass all the components of an electrical or mechanical lock.
M
Manufacturer code- in an electronic lock, a factory-set or user-set code or combination that will restore the factory default settings.
Master blank- a key blank used in a complementary keyway lock, on which only the master key combination is intended to be cut.
Master key- a key which operates all the master keyed locks or cylinders in a group, each lock or cylinder usually operated by its own change key. To combinate a group of locks or cylinders such that each is operated by its own change key as well as by a master key for the entire group. An automotive key which operates all or most locks on a vehicle where there is also a valet key employed.
Master key system- any keying arrangement which has two or more levels of keying 2. a keying arrangement which has exactly two levels of keying.
Master keyed- of or pertaining to a cylinder or group of cylinders which are or are to be combinated so that all may be operated by their own change key(s) and by additional key(s) known as master key(s). A warded lock whose warding has been designed to allow different hierarchies of keys to operate.
Mortise- to prepare by removing stock material from the edge of a door, drawer, frame or opening to create a recess which allows the flush fit or insetting of relevant lock or other hardware. The cavity prepared by mortising. Of or pertaining to a locking device designed to fit in a mortise preparation.
Multi-point lock- a lock which has more than one bolt which are thrown and withdrawn simultaneously, often in more than one direction.
N
Night latch- a rim mounted auxiliary latch bolt.
O
Overhead door closer- a closer designed for installation out of view in the door header area.
P
Padlock- a detachable and portable lock with a shackle which locks into its case.
Patented unrestricted keyway- a specific keyway which is sold without restriction by a lock maker, but which retains patent protection against non-original key blank makers.
Pick- a tool or instrument, other than the specifically designed key, made for the purpose of manipulating tumblers in a lock or cylinder into the locked or unlocked position through the keyway, without obvious damage. To manipulate tumblers in a keyed lock mechanism through the keyway, without obvious damage, by means other than the specifically designed key.
Pull handle- trim for gripping to apply pulling force to a door.
Push plate- a generally flat and commonly rectangular trim mounted for hand contact to push open a door.
Push button lock- a self contained lock with controls that must be pressed in a specific pattern or sequence to open the lock.
R
Rekey- to change the existing combination of a cylinder or lock.
Reset code- in an electronic lock, a factory-set or user-set code or combination that will restore all factory default settings except the current reset code and the audit trail.
Restricted- of or pertaining to a keyway and corresponding key blank whose sale and/or distribution is limited by the lock manufacturer in order to reduce unauthorized key proliferation.
Rim cylinder- a cylinder typically used with surface applied locks and attached with a back plate and machine screws. It has a tailpiece to actuate the lock mechanism.
Rim lock- a lock or latch typically mounted on the surface of a door or drawer.
Rose- a usually circular escutcheon.
S
Shackle- the part of a padlock, which passes through an opening in an object or fits around an object and is ultimately locked into the case. The portion of a restraint which fits around the wrist, ankle, neck, waist or thumb.
Skeleton key- any non-cylinder key whose bit, blade, and/or post is cut away enough to allow it to enter and turn in locks with different ward arrangements.
Split bolt- two separate bolts housed in the same opening in a face of a lock, each operated independently from opposite sides of the door.
Split spindle- a multi-piece spindle which allows a knob or lever to be installed on only one side of a door.
Staple- the portion of a hasp assembly with the hole or opening to receive a padlock.
Strike- a bolt receptacle typically mounted in the door jamb or the floor.
Sub master key- the master key level immediately below the master key in a system of six or more levels of keying.
T
T-handle- a T-shaped handle assembly which may be lockable.
Thumb turn cylinder- a cylinder with a turn knob rather than a keyway and tumbler mechanism.
Time delay- a feature which prevents operation until a set amount of time has elapsed. Activation normally begins when access, egress or other unlocking is desired.
Transponder key- a key with an electronic component which can convert a radio signal into an electrical current enabling the key to transmit a unique code back in return.
Tubular key- a key with a tubular blade. The key cuts are made into the end of the blade, around its circumference.
Tumbler- a movable obstruction of varying size and configuration in a lock or cylinder which makes direct contact with the key or another tumbler and prevents an incorrect key or torque device from activating the lock or other mechanism.
V
Vault- a secure room in which objects of value are stored.
W
Wall safe- a safe installed in a wall so that only the door and a frame is visible.
Ward- a usually stationary obstruction in a lock or cylinder which prevents the entry and/or operation of an incorrect key.
Warded key- a key with ward cuts only, typically a bit key, flat steel key or corrugated key.
Y
Yale,Linus- The American inventor of the pin tumbler mortise lock and its replaceable cylinder component.
About the Author
Posted in 
Tags: 
The divine comedy
Secure Logic 20720 Keypad Wall Vault, Black: The secure InvisiVault locking wall vault is perfect protection for…