RSS Feed
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
One Quart Paint
Circa 1993, what brand paint, from Builders Square, was Sugar in the Raw by? Does anyone out there know?
It was a paint color that was truely tan, not taupe or gold. I have been through10 quarts of paint nothing looks right, most colors either look pink or like a dirty diaper. I would appreciate suggestions of tans other than Sugar in the Raw, if anyone has one.
Do you have a wall with that color still on it?
If you do, you can take an inconspicuous chip of it, the size of a quarter, to a paint store. They can run it through their computer to be analyzed, which will tell them what colors are needed to make that formula.
Other than that, it may be impossible to match it...hope this helps!
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
| | Interlux Interdeck Nonskid Paint Paint, Cream, Quart $41.99 Interlux Interdeck Nonskid Paint Paint, Cream, Quart . Provides excellent slip resistance in a variety of colors Interdeck provides an excellent slip-resistant finish with a tough polyurethane resin that protects decks against everyday wear and tear. It contains a fine aggregate and will apply easily to all substrates. Interdeck has a low-sheen finish to reduce sun glare. Available in White, Cream, Beige, Gray and Blue. Quart. Formulation: One-part polyurethane nonskid enamel Application: Brush or roller Number of Coats Recommended: One or two Drying Time: At 73F: To touch: Four hours; to overcoat: 16 hours to two days; to walk on: Two days Coverage: 94sq.ft/qt. Thinner: Interlux 333 Brushing Liquid (Model 117945) |
| | Interlux Interdeck Nonskid Paint Paint, White, Quart $41.99 Interlux Interdeck Nonskid Paint Paint, White, Quart . Provides excellent slip resistance in a variety of colors Interdeck provides an excellent slip-resistant finish with a tough polyurethane resin that protects decks against everyday wear and tear. It contains a fine aggregate and will apply easily to all substrates. Interdeck has a low-sheen finish to reduce sun glare. Available in White, Cream, Beige, Gray and Blue. Quart. Formulation: One-part polyurethane nonskid enamel Application: Brush or roller Number of Coats Recommended: One or two Drying Time: At 73F: To touch: Four hours; to overcoat: 16 hours to two days; to walk on: Two days Coverage: 94sq.ft/qt. Thinner: Interlux 333 Brushing Liquid (Model 117945) |
| | Interlux Interdeck Nonskid Paint Paint, Blue, Quart $41.99 Interlux Interdeck Nonskid Paint Paint, Blue, Quart . Provides excellent slip resistance in a variety of colors Interdeck provides an excellent slip-resistant finish with a tough polyurethane resin that protects decks against everyday wear and tear. It contains a fine aggregate and will apply easily to all substrates. Interdeck has a low-sheen finish to reduce sun glare. Available in White, Cream, Beige, Gray and Blue. Quart. Formulation: One-part polyurethane nonskid enamel Application: Brush or roller Number of Coats Recommended: One or two Drying Time: At 73F: To touch: Four hours; to overcoat: 16 hours to two days; to walk on: Two days Coverage: 94sq.ft/qt. Thinner: Interlux 333 Brushing Liquid (Model 117945) |
| | Interlux Interdeck Nonskid Paint Paint, Gray, Quart $41.99 Interlux Interdeck Nonskid Paint Paint, Gray, Quart . Provides excellent slip resistance in a variety of colors Interdeck provides an excellent slip-resistant finish with a tough polyurethane resin that protects decks against everyday wear and tear. It contains a fine aggregate and will apply easily to all substrates. Interdeck has a low-sheen finish to reduce sun glare. Available in White, Cream, Beige, Gray and Blue. Quart. Formulation: One-part polyurethane nonskid enamel Application: Brush or roller Number of Coats Recommended: One or two Drying Time: At 73F: To touch: Four hours; to overcoat: 16 hours to two days; to walk on: Two days Coverage: 94sq.ft/qt. Thinner: Interlux 333 Brushing Liquid (Model 117945) |
| | Interlux Non Skid Compound Paint Additive Quart $48.99 Interlux Non Skid Compound Paint Additive Quart . Use to create nonskid areas on deckThis paint additive is made of very fine polymeric spheres that don t collect dirt as easily as natural grit. Mix directly into paint and brush or roll on. Ratio is 1/2pt additive to 1qt paint and 1qt to 1gal. Recommended Usage: Turns decks into nonskid surfaces Application: Brush, roll or broadcast Compatibility: One and two-part polyurethane, alkyd enamel Coverage: 1/2 pint per one quart enamel 1/2 pint or quart |
| | Easy Green Lawn Paint Lawn Paint One Quart Always Green Lawn Paint One Quart $36.11 Always Green Lawn Paint did a little research and found a lawn paint that could remedy brown lawn and make it green without having to use so much as one sprinkler. With such a savings on water and the beautiful facade it created Always Green Lawn Paint decided to paint lawn every summer. Always Green Lawn Paint created an affordable lawn paint and a service to apply it. With such visual impact and instant gratification with its magic curb appeal it was only natural that Always Green Lawn Paint and Green Lawns NW were created. With a green company that offers something environmentally sound and saves money on water bills it s no wonder they are a success. QuartA smaller size that works for small yards or one that has larger spots of overfertilization. This is a concentrate that requires a 15:1 water dilution. The color will last up to 3 months. It dries in about an hour; for best results stay off the grass for 46 hours. It is biodegradable and contains no hazardous chemicals. For best results mow the lawn and remove all leaves and other yard debris Grass should be dry for the paint to adhere. It is safe for children and pets. Sitting walking and playing on the grass is safe and recommended Grass treated with Always Green Lawn Paint is not harmful if ingested by pets. However it is recommended to keep all lawn care products out of reach of children. Properly sealed the product has a threeyear shelf life. We recommend stirring or shaking thoroughly for best use. Coverage depends on the grass. If the grass is completely dormant it will require more paint; if the grass still has a green quality to it it will take less. The ratio is a 15:1 water dilution or 1/4 cup to a gallon. We recommend using a spray shield a piece of cardboard or taping off the area to avoid contact with the sidewalk. Using our sprayer you will have good control of the paint flow and direction but to avoid any mishap we recommend a spray shield. If Always Green Lawn Paint gets on my deck garden |
| | Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Yellow, Quart $43.99 Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Yellow, Quart . Achieve beautiful results with this easy-to-apply enamelThe look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. For best results, prepare surface with Prekote Primer. At least two coats are required. For use above true waterline. VOC compliant. Base Formulation: One-part polyurethane with Teflon Recommended Application Method: Brush, roller, airless/conventional spray Number of Coats Recommended: Two Primer Needed: Prekote Primer, Model 492876 Drying Time: To touch: 1 to 3 hrs. Drying Time to Recoat: 8 to 16 hrs. Coverage: Brush: 137sq.ft./qt., 550sq.ft./gal.; spray: 110sq.ft/qt., 440sq.ft. |
| | Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Black, Quart $43.99 Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Black, Quart . Achieve beautiful results with this easy-to-apply enamelThe look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. For best results, prepare surface with Prekote Primer. At least two coats are required. For use above true waterline. VOC compliant. Base Formulation: One-part polyurethane with Teflon Recommended Application Method: Brush, roller, airless/conventional spray Number of Coats Recommended: Two Primer Needed: Prekote Primer, Model 492876 Drying Time: To touch: 1 to 3 hrs. Drying Time to Recoat: 8 to 16 hrs. Coverage: Brush: 137sq.ft./qt., 550sq.ft./gal.; spray: 110sq.ft/qt., 440sq.ft./ |
| | Interlux Interdeck Nonskid Paint Paint, Sand Beige, Quart $41.99 Interlux Interdeck Nonskid Paint Paint, Sand Beige, Quart . Provides excellent slip resistance in a variety of colors Interdeck provides an excellent slip-resistant finish with a tough polyurethane resin that protects decks against everyday wear and tear. It contains a fine aggregate and will apply easily to all substrates. Interdeck has a low-sheen finish to reduce sun glare. Available in White, Cream, Beige, Gray and Blue. Quart. Formulation: One-part polyurethane nonskid enamel Application: Brush or roller Number of Coats Recommended: One or two Drying Time: At 73F: To touch: Four hours; to overcoat: 16 hours to two days; to walk on: Two days Coverage: 94sq.ft/qt. Thinner: Interlux 333 Brushing Liquid (Model 117945) |
| | Sunnyside 1 Quart Ready Strip Plus Paint Varnish Remover 65832 $30.12 Paint and varnish remover. Removes up to 7 layers in one application. 50 percent stronger. Environmentally friendly. Color change signals time for paint removal. Works on most interior and exterior surfaces. Odor free. Biodegradable. 1 quart. Length: 5. Width: 4.5. Height: 5 |
| | Interlux Brightside One Part Polyurethane Paint With Teflon Polyurethane, White, Quart $43.99 Interlux Brightside One Part Polyurethane Paint With Teflon Polyurethane, White, Quart . Achieve beautiful results with this easy-to-apply enamelThe look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. For best results, prepare surface with Prekote Primer. At least two coats are required. For use above true waterline. VOC compliant. Base Formulation: One-part polyurethane with Teflon Recommended Application Method: Brush, roller, airless/conventional spray Number of Coats Recommended: Two Primer Needed: Prekote Primer, Model 492876 Drying Time: To touch: 1 to 3 hrs. Drying Time to Recoat: 8 to 16 hrs. Coverage: Brush: 137sq.ft./qt., 550sq.ft./gal.; spray: 110sq.ft/qt., 440 |
| | Back TO Nature Ready Strip Marine Paint Stripper Marine, Quart $19.99 Back To Nature Ready Strip Marine Paint Stripper Marine, Quart . An environmentally safer alternative to caustic paint removers that contain methylene chloride, Ready-Strip is formulated to remove up to five layers of marine antifouling, topside paints and varnishes in one application. The process is simplified by its blue color which turns white or light blue when paint is ready to be removed. Biodegradable, non-flammable, odor-free and it easily cleans up with water. As a paste, it clings to vertical surfaces and can be applied by brush, spray or roller. |
| | Encore Paint Disposable Paint Buckets 1 Quart $1.89 Encore Paint Disposable Buckets 1 Quart . Disposable paper buckets make clean up a cinchSturdy paper construction. Non-waxed. Compatible with most paint 1 or 2 1/2 quart size |
| | Hazardous Materials Bulk Shipping Boxes, Holds 2 One Quart Paint Cans. Case of 25 $123.32 Case of 25. Constructed from strong 275#/ECT-44 single wall Kraft corrugated. 17" x 8 1/2" x 5 3/4" inside dimensions (LxWxD). Holds 2 - 1 Quart Paint Cans. UN Number: UN4G/X37/S. Use these containers as refills for foam shipper kits. Cartons are printed |
| | Hazardous Materials Bulk Shipping Boxes, Holds 4 One Quart Paint Cans. Case of 25 $148.88 Case of 25. Constructed from strong 275#/ECT-44 single wall Kraft corrugated. 17" x 17" x 5 3/4" inside dimensions (LxWxD). Holds 4 - 1 Quart Paint Cans. UN Number: UN4G/X37/S. Use these containers as refills for foam shipper kits. Cartons are printed wit |
| | Hazardous Materials Bulk Shipping Boxes, Holds 1 One Quart Paint Can. Case of 25 $86.44 Case of 25. Constructed from strong 275#/ECT-44 single wall Kraft corrugated. 8 1/2" x 8 1/2" x 5 3/4" inside dimensions (LxWxD). Holds 1 - 1 Quart Paint Can. UN Number: UN4G/X37/S. Use these containers as refills for foam shipper kits. Cartons are printe |
| | Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Sapphire Blue, Quart $43.99 Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Sapphire Blue, Quart . Achieve beautiful results with this easy-to-apply enamelThe look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. For best results, prepare surface with Prekote Primer. At least two coats are required. For use above true waterline. VOC compliant. Base Formulation: One-part polyurethane with Teflon Recommended Application Method: Brush, roller, airless/conventional spray Number of Coats Recommended: Two Primer Needed: Prekote Primer, Model 492876 Drying Time: To touch: 1 to 3 hrs. Drying Time to Recoat: 8 to 16 hrs. Coverage: Brush: 137sq.ft./qt., 550sq.ft./gal.; spray: 110sq.ft/qt., 44 |
| | Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Light Blue, Quart $43.99 Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Light Blue, Quart . Achieve beautiful results with this easy-to-apply enamelThe look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. For best results, prepare surface with Prekote Primer. At least two coats are required. For use above true waterline. VOC compliant. Base Formulation: One-part polyurethane with Teflon Recommended Application Method: Brush, roller, airless/conventional spray Number of Coats Recommended: Two Primer Needed: Prekote Primer, Model 492876 Drying Time: To touch: 1 to 3 hrs. Drying Time to Recoat: 8 to 16 hrs. Coverage: Brush: 137sq.ft./qt., 550sq.ft./gal.; spray: 110sq.ft/qt., 440sq |
| | Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Medium Blue, Quart $43.99 Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Medium Blue, Quart . Achieve beautiful results with this easy-to-apply enamelThe look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. For best results, prepare surface with Prekote Primer. At least two coats are required. For use above true waterline. VOC compliant. Base Formulation: One-part polyurethane with Teflon Recommended Application Method: Brush, roller, airless/conventional spray Number of Coats Recommended: Two Primer Needed: Prekote Primer, Model 492876 Drying Time: To touch: 1 to 3 hrs. Drying Time to Recoat: 8 to 16 hrs. Coverage: Brush: 137sq.ft./qt., 550sq.ft./gal.; spray: 110sq.ft/qt., 440s |
| | Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Ocean Blue, Quart $43.99 Interlux Brightside One Part Polyurethane Paint With Teflon Paint, Ocean Blue, Quart . Achieve beautiful results with this easy-to-apply enamelThe look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. For best results, prepare surface with Prekote Primer. At least two coats are required. For use above true waterline. VOC compliant. Base Formulation: One-part polyurethane with Teflon Recommended Application Method: Brush, roller, airless/conventional spray Number of Coats Recommended: Two Primer Needed: Prekote Primer, Model 492876 Drying Time: To touch: 1 to 3 hrs. Drying Time to Recoat: 8 to 16 hrs. Coverage: Brush: 137sq.ft./qt., 550sq.ft./gal.; spray: 110sq.ft/qt., 440sq |
| Account limit of 2104 requests per hour exceeded. |
New Glidden Paint Inspires America to Get Going
how many ml in a pint?
I'm actually gonna answer this one myself because I see it was supposedly resolved before but answer was incomplete...
pint (pt) [1]
a traditional unit of volume equal to 1/2 quart. There are three different quarts in use in Britain and the United States, and hence there are three different pints: [i] the U. S. liquid pint, equal to exactly 28.875 cubic inches, 16 fluid ounces, or approximately 473.176 milliliters; [ii] the U. S. dry pint, equal to 33.600 cubic inches or approximately 550.611 milliliters; and [iii] the British Imperial pint, equal to 20 British fluid ounces, 34.678 cubic inches or approximately 568.261 milliliters. The origin of the word pint is unclear. It may come from the Latin pincta, painted, referring to a marking at the one-pint level on a larger container.
so it can either be 473 or 550 in the USA or 568 in the UK
I believe it can also be different in other parts of the world like Australia, anyone wanna answer with their countries conversion ?
The pint is a unit of volume or capacity. It is used mainly in the U.S., the UK and the Republic of Ireland. The value differs between countries, and the U.S. has two types of pint:
1 Imperial pint (UK) = 20 UK fluid ounces ≈ 568 mL (0.56826125 litres more exactly)
1 Imperial pint (UK) = 4 UK gills (this was the legal definition although in some areas a gill of milk or beer referred to 1/2 pint; elsewhere a gill was the 1/3 pint of milk given free to school children)
1 pint (U.S., wet) = 16 U.S. fluid ounces = 2 U.S. cups ≈ 473 mL (0.473176473 litres exactly)
1 pint (U.S., dry) ≈ 551 mL (0.5506104713575 litres exactly)
Posted in 
Tags: 