RSS Feed
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Tactical Scope Mount
would using a sniper rifle in this field be fun?
i play airsoft in a firld that is 140ft long and 70ft wide would it be fun sitting in the back of field sniping with a
- UTG AWP L96 Spring Airsoft Sniper Rifle ACU
- Capacity: 30 Rounds
- Velocity: 450-480 fps (0.2 g BB)
- Range: 200-230 feet
- Adjustable Hop Up
- Weight: 10 lbs
- Compact Tactical Bipod Included
- 2 Metal Magazines Included
- Complete Picatinny Mounting Rail System
- BB Speed Loader and Sling Included
- Scope and Scope rings Not Included
- Made in China
UTG L96 Spring Airsoft Sniper Rifle ACU
if i had an ak 47 gun as secondary gun.........or am i better off with two AEG guns? such as an MP5.....a P90....or a MP40????
I'd go with ....
The Sniper and a P90
Snipe with the Sniper
SPRAY AND PRAY WITH THE P90!
-hehe
Good luck!
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
| | SKS Scope Mount 1'' Tactical Rings Airsoft Accessory $17.95 SKS Scope Mount 1'' Tactical Rings Airsoft Accessory |
| | M14/M1a Tactical Scope Mount M14/M1a Scope Mount $131.25 All-steel bolt-on mount provides a rock solid platform for a scope red dot or other holographic sighting device on an M14-type rifle. 13-slot rail accepts Picatinny or Weaver -style rings. Three anchor points on receiver make sure the mount won’t shift under recoil so there’s no loss of zero. Sight channel allows use of the original iron sights without removing scope. Requires removal of stripper clip guide. No permanent modification required. Installation instructions and tools included. Minor fitting may be required. Mfg: Pro Mag SPECS: Machined 4150 chrome-moly steel heat treated to Rc 55 phosphate coated matte black finish. 53⁄8" (13.6cm) long 13⁄8" (3.5cm) wide 17⁄8" (4.7cm) high. 11.9 oz. (337g) weight. |
| | M14/M1a Tactical Scope Mount M14/M1a Tactical Mount $341.65 Fully-machined hardened steel mount with three-point mounting provides a stable secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope. Weaver has Weaver-style top rail. Picatinny uses a Picatinny rail for added sight mounting options. 7" Picatinny - Extended 7" length Picatinny rail system allows you to use many sight mounting options. Tactical features a Picatinny rail but without the open sight channel. Absolutely can’t give under the tightest clam Mfg: Smith Enterprise SPECS: 4140 steel black nitride finish. Hardened to Rc 60-62. 5.38" (13.6cm) long. 1.875" (4.7cm) high. Weighs 10.9 oz (310 g). 7" Picatinny - 7" (17.7cm) long 1.85" (4.7cm) tall. Weighs 15.3 oz. (435g). |
| | SKS Scope Airsoft Gun Mount 1'' Tactical Rings Accessory $39.99 SKS Scope Airsoft Gun Mount 1'' Tactical Rings Accessory is in stock and ready to ship from TrendTimes.com. Our toy stores sell SKS Scope Airsoft Gun Mount 1'' Tactical Rings Accessory for the best price of $17.77 and personal shoppers are standing by to assist you. |
| | M14/M1a Tactical Scope Mount M14/M1a Picatinny Scope Mount $322.46 Fully-machined hardened steel mount with three-point mounting provides a stable secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope. Weaver has Weaver-style top rail. Picatinny uses a Picatinny rail for added sight mounting options. 7" Picatinny - Extended 7" length Picatinny rail system allows you to use many sight mounting options. Tactical features a Picatinny rail but without the open sight channel. Absolutely can’t give under the tightest clam Mfg: Smith Enterprise SPECS: 4140 steel black nitride finish. Hardened to Rc 60-62. 5.38" (13.6cm) long. 1.875" (4.7cm) high. Weighs 10.9 oz (310 g). 7" Picatinny - 7" (17.7cm) long 1.85" (4.7cm) tall. Weighs 15.3 oz. (435g). |
| | Jing Gong Full Metal Tactical Scope Mount MP5 Submachine Gun FPS-400 Airsoft Gun $179.95 Jing Gong Full Metal Tactical Scope Mount MP5 Submachine Gun FPS-400 Airsoft Gun |
| | Scope Accessory Mount Scope Accessory Mount Only $64.99 Compact rugged mount fully machined from 6061 T6 aluminum clamps directly to any 1" diameter scope tube and provides 13⁄16" of Picatinny rail space for mounting a light red dot sight laser or other accessory. Enables quick transition from long-range (scope) targeting to close-range (red dot) simply by shifting your eyes. Durable hardcoat anodized finish resists surface wear and matches most tactical scope finishes. Mfg: Wilson Combat SPECS: 6061 T6 Aluminum hardcoat anodized matte black. 13⁄16" long rail. Fits 1" scope tube. |
| | 10/22 & 77/22~ Tactical Picatinny Scope Mount 77/22 Picatinny Scope Base $59.99 Machined aluminum mount installs easily on your rifle's receiver. Made to Picatinny specifications to give you a rugged stable platform for your optics. Eleven cross slots ensure optimum scope placement for perfect eye relief. Screw holes line up precisely with factory receiver scope base hole pattern for quick simple installation. Accepts Picatinny or Weaver-style rings. Mfg: Weigand Combat SPECS: Aluminum black matte anodized finish. 10/22 - 43⁄4" (12.07cm) long 1⁄2" (12.7mm) tall from top of receiver. 77/22 - 51⁄8" (13cm) long ½" tall from top of receiver. Screws included. |
| | 10/22 & 77/22~ Tactical Picatinny Scope Mount 10/22 Picatinny Scope Base $19.95 Machined aluminum mount installs easily on your rifle's receiver. Made to Picatinny specifications to give you a rugged stable platform for your optics. Eleven cross slots ensure optimum scope placement for perfect eye relief. Screw holes line up precisely with factory receiver scope base hole pattern for quick simple installation. Accepts Picatinny or Weaver-style rings. Mfg: Weigand Combat SPECS: Aluminum black matte anodized finish. 10/22 - 43⁄4" (12.07cm) long 1⁄2" (12.7mm) tall from top of receiver. 77/22 - 51⁄8" (13cm) long ½" tall from top of receiver. Screws included. |
| | M14/M1a Tactical Scope Mount Titanium M14/M1a Tactical Mount $395 Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly without alteration to the side receiver ring charger guide dovetail and receiver mount lug. Precision-cut rail includes 5º angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock hardened to Rc 28-32 for maximum strength. Titanium model is made from high quality hot-forged billet not a casting Mfg: Sadlak Industries SPECS: 57⁄16" (13.8cm) long 2" (5.1cm) wide 1¾" (4.4cm) high. Includes mounting hardware Allen wrenches and complete instructions. Steel - 4142 chrome-moly steel hardened to Rc 28-32 mil-spec manganese phosphate Parkerized matte black. 11.8 oz. (33 |
| | M14/M1a Tactical Scope Mount Airborne M14/M1a Tactical Mount $289.99 Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly without alteration to the side receiver ring charger guide dovetail and receiver mount lug. Precision-cut rail includes 5º angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock hardened to Rc 28-32 for maximum strength. Titanium model is made from high quality hot-forged billet not a casting Mfg: Sadlak Industries SPECS: 57⁄16" (13.8cm) long 2" (5.1cm) wide 1¾" (4.4cm) high. Includes mounting hardware Allen wrenches and complete instructions. Steel - 4142 chrome-moly steel hardened to Rc 28-32 mil-spec manganese phosphate Parkerized matte black. 11.8 oz. (33 |
| | M14/M1a Tactical Scope Mount Aluminum M14/M1a Tactical Mount $145.99 Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly without alteration to the side receiver ring charger guide dovetail and receiver mount lug. Precision-cut rail includes 5º angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock hardened to Rc 28-32 for maximum strength. Titanium model is made from high quality hot-forged billet not a casting Mfg: Sadlak Industries SPECS: 57⁄16" (13.8cm) long 2" (5.1cm) wide 1¾" (4.4cm) high. Includes mounting hardware Allen wrenches and complete instructions. Steel - 4142 chrome-moly steel hardened to Rc 28-32 mil-spec manganese phosphate Parkerized matte black. 11.8 oz. (334g) wt. Titaniu |
| | M14/M1a Tactical Scope Mount 7" M14/M1a Picatinny Mount $503.35 Fully-machined hardened steel mount with three-point mounting provides a stable secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope. Weaver has Weaver-style top rail. Picatinny uses a Picatinny rail for added sight mounting options. 7" Picatinny - Extended 7" length Picatinny rail system allows you to use many sight mounting options. Tactical features a Picatinny rail but without the open sight channel. Absolutely can’t give under the tightest clam Mfg: Smith Enterprise SPECS: 4140 steel black nitride finish. Hardened to Rc 60-62. 5.38" (13.6cm) long. 1.875" (4.7cm) high. Weighs 10.9 oz (310 g). 7" Picatinny - 7" (17.7cm) long 1.85" (4.7cm) tall. Weighs 15.3 oz. (435g). |
| Account limit of 2104 requests per hour exceeded. |
How to Mount a Scope
Weaver style scope rings for use on a ruger p345?
I want to buy a tactical flashlight to mount under the barrel of my p345.,...lights are exspensive...why couldnt you take a weaver rifle scope ring and add put A flash light in it and mount it under the handgun ?
There are mounts designed specifically for you pistol.
Necessity is the mother of invention, try it if you like.
Posted in 
Tags: 